Fiat Bravo Service Manual page 536

Hide thumbs Also See for Bravo:

Table of Contents

Auto transmission & differential

Removing-refitting

1. Remove the power unit central mounting

by undoing the bolts shown in the figure.

2. Remove the power unit mounting on the

gearbox side by undoing the bolts s h o w n

in the figure.

3. Remove the bottom bolts securing the

gearbox to the engine.

4. Gently separate the bellhousing from the

engine, then manoeuvre the converter

back into its seating. For greater safety, fit

a bracket, to be manufactured on site,

screwing it into the seat of the bolt secur-

ing the gearbox bottom guard, to prevent

the converter falling out of its seating.