Fiat Bravo Service Manual page 518

Hide thumbs Also See for Bravo:

Table of Contents

Auto transmission and differential

Servicing and adjustments

Remove the nuts securing the relay and fuse

box to the battery cage, then move the box

over to one side.

Disconnect the i.e. control unit supply con-

Disconnect the earth cable (1), remove the

nuts securing the i.e. control unit mounting

bracket, then remove the control unit from the

engine compartment. The nuts indicated also

secure the starter motor supply wiring and the

front cable/fuel injection cable connection.

Remove the bolts (1) and slacken the bolt

(2) securing the battery cage to the body

shell. Before removing the cage, disconnect

the cable clip underneath.

Remove the split pin and washer shown in

the figure; lift the gear change cable head so

as to disconnect it from the gear change

lever position sensor.