Fiat Bravo Service Manual page 533

Auto transmission & differential
Removing-refitting
21-27.
56
Bravo-Brava
1. Relieve the staking then remove the wheel
hub nut (gearbox side and timing gear
side).
2. Remove the plastic wheelarch trim on the
gearbox side by undoing the screws and
retaining button shown in the figure. To
remove the trim, also disconnect the brake
pad wear sensor connector (repeat the
operation on the other side).
3. Remove the nut securing the track rod end
to the vertical link, then remove the latter
from the vertical link arm using the puller
1847038000 (repeat the procedure on the
other track rod end).
4. Remove the bolts securing the vertical link
(gearbox side and timing gear side) to the
shock absorber.
ft
16v
Publication no. 506.670/07