Removing-Refitting Accelerator Cable - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

R E M O V I N G - R E F I T T I N G

Disconnect the battery negative terminal,

then proceed as follows:

1. In the engine bay, turn the throttle valve

control lever and release the accelerator

cable. Remove the clip, then withdraw

the cable from the bracket.

2. Working from inside the car, remove the

left foot rest, then disconnect the control

cable from the anchorage on the accelera-

3. Remove the pipe connecting the air clean-

er to the butterfly valve case.

4. Remove the relay unit protective cover.

5. Unscrew the relay bracket retaining bolts

and position unit to one side.

A C C E L E R A T O R