Removing-Refitting Timing Drive Belt - Fiat 1998 Marea Service Manual

Marea- Marea Weekend ©
99 range
Copyright Fiat Auto
m i6v
1. If tools 1860985000 do not engage in the
housings in the camshafts, the engine tim-
ing is not correct, therefore, the crankshaft
must be rotated, using small movements,
until the tools (2) are perfectly aligned with
the shaft splining (1), then, using spanner
1860831000, loosen the bolt fixing the
camshaft pulley.
2. Rotate the crankshaft again, until tools
1860992000 indicate that the pistons are
aligned, i.e. with reference (1) perfectly
aligned with reference (2). The engine is
correctly
Tighten the timing pulley to the recom-
mended torque and proceed with refitting
the components dismantled previously.
REMOVING-REFITTING
BELT
Rotate the auxiliary shaft drive pulley
through its normal direction of rotation until
the dowel (1) is opposite the rpm and TDC
sensor (3), then undo the fixing bolts and
remove it. In addition, unto the bolts for the
timing belt lower shield.
Replacing timing belt
timed in this
TIMING DRIVE
Remove the auxiliary shaft drive belts
as illustrated in the previous para-
graphs.
Engine
10.
configuration.
17