Park/Pickup Keys - Mitel 6915 User Manual

7.10 Park/Pickup Keys

The 6915 SIP IP phone has a park and pickup call feature that allows you to park a call and pickup a call
when required. The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable Park key to park the
call.
• After the call is parked, you can press the Pickup key, followed by the applicable value to pickup the
call.
Administrators can configure the Park and Pickup keys for any line using the configuration files or the
Mitel Web UI.
Users can make changes to customize the label of the Park and Pickup keys using the Web UI.
Configuring Park/Pickup Keys Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
2. Select from Key 1 through Key 20 on the Top keys.or Select from Key 1 through Key 18 on the Bottom
keys.
3. In the Type field, select Park.
4. In the Label field, enter a label for the Park softkey.
Note:
The Value and Line fields are configured by the Administrator.
5. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
6. Select from Key 1 through Key 20.
7. In the Type field, select Pickup.
8. In the Label field, enter a label for the Pickup softkey.
Note:
The Value and Line fields are configured by the Administrator.
9. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Version 1.0
User Guide
Configuring Softkeys
90