Set the 'Alignment' mode
Introduction
You can optimize the print productivity by reducing the distance the print carriage needs
to travel to print the output. To do so you can align the image to the top-right hand
corner of the sheet.
You can choose the following alignment settings.
#
'Alignment' mode
'Top left'
'Left'
'Bottom left'
Before you begin
This setting is editable for the Key operator or Power user.
How to set the alignment mode
Click 'Preferences' - 'Print job defaults'.
1.
Click 'Edit' in the 'Layout' bar or click the value of the 'Alignment' setting.
2.
Select 'Top right' if the print productivity is the most important factor.
3.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
'Top'
'Center'
'Bottom'
Chapter 8 - Print quality and Print productivity
Set the 'Alignment' mode
'Top right'
'Right'
'Bottom right'
331