Show Ip Dhcp Snooping - Cisco Catalyst 2950 Command Reference Manual

show ip dhcp snooping

show ip dhcp snooping
Use the show ip dhcp snooping user EXEC command to display the DHCP snooping configuration.
Syntax Description
This command has no arguments or keywords.
Command Modes
User EXEC
Command History Release
12.1(19)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show ip dhcp snooping command:
Switch> show ip dhcp snooping
Switch DHCP snooping is enabled
DHCP snooping is configured on following VLANs:
40-42
Insertion of option 82 is enabled
Interface
------------------------
FastEthernet0/5
FastEthernet0/7
FastEthernet0/3
FastEthernet0/5
FastEthernet0/7
FastEthernet0/5
FastEthernet0/7
Related Commands Command
show ip dhcp snooping binding
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-352
show ip dhcp snooping
Modification
This command was introduced
Chapter 2
Trusted Rate limit (pps)
------- ----------------
yes unlimited
yes unlimited
no 5000
yes unlimited
yes unlimited
yes unlimited
yes unlimited
Description
Displays the DHCP snooping binding information.
Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01