Show Encryption Service Stat - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show encryption service stat

To display the status of the encryption service, use the show encryption service stat command.
show encryption service stat
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
5.2(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the status of the encryption service:
switch# show encryption service stat
Encryption service is enabled
Master Encryption Key is configured.
Type-6 encryption is being used
switch#
Related Commands
Command
show key chain
Modification
This command was introduced.
Description
Displays the configuration for a specific keychain.
Cisco Nexus 7000 Series Security Command Reference
show encryption service stat
765