Show Ip Sla Configuration - Cisco Nexus 7000 Series Command Reference Manual

show ip sla configuration

show ip sla configuration
To display configuration values including all defaults for all Cisco NX-OS IP Service Level Agreements
(SLAs) operations or a specified operation, use the show ip sla configuration command.
Syntax Description operation
Command Default
User EXEC
Privileged EXEC
Command Modes
None
Command History Release
6.1(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the configuration values including all defaults for all Cisco NX-OS
IP Service Level Agreements (SLAs) operations or a specified operation:
switch# show ip sla configuration 3
IP SLAs Infrastructure Engine-III
Entry number: 3
Owner: 12345
Tag:
Operation timeout (milliseconds): 5000
Type of operation to perform: udp-echo
Target address/Source address: 172.16.1.176/0.0.0.0
Target port/Source port: 1/0
Type Of Service parameter: 0x80
Request size (ARR data portion): 16
Verify data: No
Data pattern:
Vrf Name: default
Control Packets: enabled
Schedule:
Operation frequency (seconds): 60
Next Scheduled Start Time: Pending trigger
Group Scheduled : FALSE
Randomly Scheduled : FALSE
Life (seconds): 3600
Entry Ageout (seconds): never
Recurring (Starting Everyday): FALSE
Status of entry (SNMP RowStatus): notInService
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
1-46
show ip sla configuration [operation]
(Optional) Displays the number of the IP SLAs operation for which the
details are displayed. The range is from 1 to 2147483647.
Modification
This command was introduced.
Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands
(not considered if randomly schedule
OL-27555-03