Table of Contents
Advertisement
Chapter 6
Show Commands
show ip http server secure
To view the HTTPS configuration on your Server Switch, enter the show ip http secure server
command in User Exec mode or Privileged Exec mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Ethernet read-only user.
Use this command to determine if HTTPS actively runs on your Server Switch and to determine the
HTTPS port number that it uses.
Command Output:
Table 6-77
Table 6-77
Field
secure-server
secure-port
secure-cert-common-name
Examples
The following example displays the HTTPS configuration on the Server Switch:
SFS-270# show ip http server secure
================================================================================
================================================================================
secure-cert-common-name : useMgmtEnetIpAddr
OL-9163-02
show ip http secure server
describes the fields in the command output.
show ip http Command Output Field Descriptions
Description
Displays "enabled" if you have activated the server with the ip http
server command. Displays "disabled" if you have deactivated the server
with the no ip http server command.
Displays the HTTP port number that the HTTP server uses.
Certificate name of the secure server.
secure-server : enabled
secure-port : 443
IP HTTP Secure Info
Cisco SFS 7000 Series Product Family Command Reference Guide
show ip http server secure
6-187
Advertisement
Table of Contents
