Configuring operation mode
Configuring operation mode
Introduction
Depending on whether you are printing with a single, a twin or a triplex printing
system, and whether you are printing one-sided or two-sided, you must make the
appropriate settings on the operator panel.
To configure the operation mode
[53]
Proceed as follows:
1.
On the operator panel, select the menu 'Configuration' -> 'Printing system'
-> 'Operating mode':
2.
Select one of the option fields accordingly:
106
Chapter 5 Working with the operator panel
'Single'
'Twin simplex'
'Twin duplex'
'Triplex'