Installing the heating element and completing replacement of the fuser roller
Proceed as follows:
[564]
10.
11.
Close the front and side door of the fuser station.
Completing the replacement of the fuser roller
[216]
Proceed as follows:
1.
Select the inserted fuser roller type on the operator panel.
2.
Select inserted fuser roller.
The fuser roller designation is printed on the packaging.
3.
Indicate on the operator panel whether a new fuser roller has been fitted:
4.
Complete the replacement of the fuser roller on the operator panel:
398
Chapter 9 Replacing expendables
When you click on the 'Yes' button:
The message is automatically deleted from the operator panel. Replace-
ment of the fuser roller is recorded in the 'Consumable history' menu.
When you click on the 'No' button:
The fuser roller was only cleaned, for example. No replacement is record-
ed in the 'Consumable history' menu.
Click on the 'OK' button to complete the fuser roller replacement.
All units of the printing system are inspected (duration around 2-3 min-
utes), before the printing system is switched to the 'Ready' status.
Swivel on oiling unit and turn
the oiling unit knob to the right
to lock it.