Table of Contents
Advertisement
Install transfer roller
To install the transfer roller
[225]
Proceed as follows:
1.
Hold the transfer roller, so that the high-voltage contact points to the front
of the printing system.
[602]
Caution
When inserting the transfer roller, ensure that you do not touch the
high-voltage contact.
[603]
2.
[604]
Note
The high-voltage contact locking mechanism can only be closed if a transfer
roller has been inserted.
[605]
3.
[606]
Caution
Risk of injury when closing the paper transporter.
Close the paper transporter using the blue-green handle only.
Install transfer roller
First insert the transfer roller in
the rear part of the transfer roll-
er mounting, then in the front
part. Carefully slide the transfer
roller towards the rear.
Close the high-voltage contact
locking mechanism.
421
Advertisement
Table of Contents
