Replacing the waste toner bottle - overview
Replacing the waste toner bottle
Replacing the waste toner bottle - overview
Caution:
Do not allow toner to get into eyes. In the event of contact with eyes, rinse
eyes out with plenty of cold water and seek medical help.
Avoid contact with the skin; wear gloves. In the event of contact with the
skin, wash toner off with plenty of water.
Do not inhale toner. Avoid accumulation of dust. If, after inhaling toner,
you experience symptoms such as nausea, headaches or dizziness,
immediately go out into the fresh air.
Do not spill toner. You can slip on spilled toner. Clean up toner spill
immediately.
Keep waste toner bottle out of the reach of children and store it away
from containers used for food and drink.
Always use an industrial vacuum cleaner with a grounded suction tube,
rubber nozzle and filter set for fine dust. For large toner volumes (e. g. 1
bottle), an explosion-proof industrial vacuum cleaner must be used.
Attention:
Keep used toner ready for collection by Service or the contracted shipping
company.
Overview
The printing system detects when the waste toner bottle is full automatically and
displays a warning on the operator panel in good time.
Proceed as follows when replacing the waste toner bottle:
Removing the waste toner bottle on page 333
Inserting the waste toner bottle on page 335
332
Chapter 8 Replacing consumables