Table of Contents
Advertisement
Cleaning the filter
Cleaning the filter
Caution:
There can be a high build-up of static charge when vacuuming the toner
spill.
Always use an industrial vacuum cleaner with a grounded suction tube,
rubber nozzle and filter set for fine dust. For larger toner quantities, the
industrial vacuum cleaner must be explosion-proof.
Caution:
Before cleaning the filter, observe the safety directives in the section
Cleaning the printing system — overview on page
Attention:
You can only carry out filter cleaning when in the 'Stop' or 'Operator intervention
necessary' status.
To clean the filter
[149]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
Open the cover and both doors at the front of the printing system.
[401]
3.
290
Chapter 7 Cleaning the printing system
250.
Open the quick lock on the fil-
ter cover.
Advertisement
Table of Contents
