Cleaning The Toner Dust Sensor - Oce VarioStream 8000 User Manual

Cleaning the toner dust sensor

Note:
When replacing the fine filter, toner can enter the toner dust sensor.
To clean the toner dust sensor
[143]
Proceed as follows:
[380]
1.
[381]
2.
[382]
3.
Cleaning the toner dust sensor
Loosen plastic screw.
Clean opening with a round
brush (see Cleaning agents
and devices, cleaning intervals
on page 252). Before use,
sharply angle round brush in
the middle and insert in the
opening.
For function control, the LED
must light up when the round
brush is being inserted and go
off when it is removed.
Tighten the plastic screw again.
279