Table of Contents
Advertisement
Removing the waste toner bottle
Proceed as follows:
[451]
6.
7.
Place the interlock lid on the full waste toner bottle.
[452]
Caution
There can be a high build-up of static charge when vacuuming the toner
spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rub-
ber nozzle and filter set for fine dust. For large toner volumes (e.g. 1 bottle),
an explosion-proof industrial vacuum cleaner must be used.
[453]
8.
9.
Inserting the waste toner bottle on page 335
334
Chapter 8 Replacing consumables
Remove the waste toner bottle
holder by the locking lever.
Remove the bottle from the
holder by the handle.
If toner has gathered in the bot-
tle, remove with a vacuum
cleaner.
Advertisement
Table of Contents
