Changing the photoconductor drum
Note:
Depending on the selected configuration, the PC drums listed for installation are the
only ones permitted for this configuration.
To replace the photoconductor drum
[129]
Proceed as follows:
1.
The list with the work steps for replacing the photoconductor drum is dis-
played in the right half of the window:
[310]
The steps in the list must be followed in sequence.
Detailed information on replacing the photoconductor drum:
Replacing the photoconductor drum - overview on page 399
Information on the icons displayed on the operator panel under 'Steps' can be
found under
2.
Click on the 'OK' button to complete the photoconductor drum replacement:
3.
Replace fuser roller on page 244
Explanation of icons on page
Changing the photoconductor drum
118.
243