Table of Contents
Advertisement
Remove fine filter
Caution:
Observe the safety directives in the section
on page
380.
Removing the fine filter
[209]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button:
2.
On the operator panel, select the 'VarioStream' -> 'Changing consumables'
-> 'Replace fine filter' menu.
3.
Click the 'OK' button to start the procedure.
Information on the icons displayed on the operator panel under
'Work-steps': See
4.
Open the left and center door at the back of the printing system.
[524]
5.
Explanation of icons on page
Remove fine filter
Replacing the fine filter - overview
118.
Push lever to the left of the fine
filter container down to unlock
the filter housing.
381
Advertisement
Table of Contents
