Table of Contents
Advertisement
Settings for different paper properties
Proceed as follows:
[167]
8.
[168]
9.
10.
Set the pressure of the tension rollers according to the paper properties:
On the operator panel, select:
11.
Prepare the printing system for printing after inserting the paper web (see
After inserting the paper web on page
146
Chapter 6 Operating the printing system
M
L
'VarioStream' -> 'Configuration' -> 'Printing system' -> 'Paper path'.
In the 'Paper outlet' area, set the pressure with the aid of the slide control.
Paper without marks or with
horizontal perforation:
Align the upper edge of the
form or cross perforation with
the insert mark using the ADVF
and ADVR buttons according
to the form length.
On the operator panel, select:
'VarioStream' -> 'Configura-
tion' -> 'Paper' -> 'Proper-
ties' menu
In the 'Align page' area,
click on the option 'Perfora-
tion on ruler'.
Paper with marks:
Position the paper with the
ADVF and ADVR keys so that
the flying spot (L) of the upper
mark sensor is within the
mark (M). You may have to po-
sition the upper mark sensor
horizontally (see
upper mark sensor on
page
172).
On the operator panel, select:
'VarioStream' -> 'Configura-
tion' -> 'Paper' -> 'Proper-
ties' menu
In the 'Align page' area,
click on the option 'Mark to
sensor'.
147).
Positioning
Advertisement
Table of Contents
