Table of Contents
Advertisement
Start conversion
Start conversion
Introduction
The following work steps must be carried out in sequence in order to convert the
printing system to the desired configuration:
To start the conversion
[126]
Proceed as follows:
1.
The first step is preselected under 'Steps':
[307]
Information on the icons displayed on the operator panel under 'Steps' can
be found under
2.
Click on the 'OK' button to start the printing system conversion to the select-
ed configuration:
3.
Replacing the toner feed on page 241
240
Chapter 6 Operating the printing system
Explanation of icons on page
118.
Advertisement
Table of Contents
