Table of Contents
Advertisement
Additional operator panel
Button
[47]
STOP
56
Chapter 3 Description of the printing system
Function
Switches the tension rollers on. Pressing
the key again switches them off.
After a running time of approx. 10 sec-
onds, the tension rollers are automati-
cally switched off (not during paper
insertion).
This key has no function during the
preparation phase of the printing sys-
tem.
The button can only be pressed in the
'Stop' status.
Switches the printing system to the
'Stop' status or cancels a current func-
tion.
The operator panel displays the 'Stop'
status.
Before the printing system stops, the
pages prepared on the PC drum are
transferred to the paper. The paper stops
at the start of a page.
Characters on the paper between paper
transporter and fuser station are not yet
fused.
The printing system is made operational
again by pressing the READY button.
Note:
For twin or triplex operation,
pressing the STOP button on
one of the printing systems
stops all printing systems. If
a stop condition also appears
on another printing system,
the STOP LED also lights up.
LED display
No LED display
The red LED lights up.
Advertisement
Table of Contents
