Oce VarioStream 8000 User Manual page 266

Clean fuser station
Proceed as follows:
[351]
10.
11. Check the dirt collection bin.
[352]
Caution
Do not damage the cleaning plate.
12. Remove dirt from the cleaning plate with the paper cutter.
13. If the dirt bin is over half filled with dirt, insert a new bin (see
dirt bin - overview on page
[353]
14.
15. Only if a soft fuser roller is installed:
Also check whether the fuser roller is soiled with toner. If so, clean the fuser
roller (see
266 Chapter 7 Cleaning the printing system
423).
Clean soft fuser roller on page
Press against the pressure pin
and swivel out the dirt pan.
Replacing the
Turn the fuser roller by hand
and check visually for visible
damage, such as scratches,
loosened coating or blistering
on the surface.
Replace the fuser roller if dam-
aged (see Replacing the fuser
roller - overview on page
270).
385).