Table of Contents
Advertisement
Operation
Introduction
Observe the following instructions when operating the printing system:
Service personnel
Only operators, key operators and Service personnel may operate the printing
system.
The printing system must not be operated by persons under the influence of alcohol
or drugs, or by persons taking certain types of medication, such as psychotropic
drugs.
Before operating the printing system, carefully read through the documentation.
Please ask if you do not understand anything in the documentation (e. g. regarding
Service).
In cases of emergency, power off the printing system off immediately with the main
switch. In the event of damage to the casing, power cable or operating elements, or
penetration of fluids or foreign bodies, call the appropriate Service representative.
Do not wear any loose hanging clothing (e. g. ties, sleeves, scarves), necklaces and
bracelets, loose belts, rings and unprotected long hair. These can catch in the drive
mechanisms or moving parts of the printing system and cause injury.
Safety covers
Do not attempt to remove safety covers yourself; do not manipulate safety
equipment such as the switches monitoring the safety covers, fuses etc., and do not
perform any work not intended to be performed by operators. Such action can cause
accidents and may also damage the printing system.
Safe operation of the printing system is guaranteed only when the outer paneling is
fully mounted. Only properly and fully affixed casing ensures:
Protection from electrical shocks
Protection against injury from mechanical parts, e.g. cuts, drawing in, crushing
Protection against the spread of fire
Sufficient cooling of the printing system.
Keep all doors, trims, flaps and covers closed while the printing system is in
operation. This ensures that limit values for electromagnetic compatibility are not
exceeded. Noise emission is also minimized.
Operation
37
Advertisement
Table of Contents
