Table of Contents
Advertisement
Install transfer roller
Proceed as follows:
[607]
4.
5.
Close the left and right doors at the front of the printing system.
6.
Close the cover hood.
7.
Indicate on the operator panel whether a new transfer roller has been insert-
ed, or whether it has just been cleaned:
In both cases, the message on the operator panel is automatically deleted,
and the replacement of the transfer roller is recorded in the 'Consumables
history' menu.
8.
Click the 'OK' button on the operator panel to complete the procedure.
All aggregates of the printing system are inspected (duration around two to
three minutes) before the printing system is switched to the 'Ready' status.
9.
Dispose of the old transfer roller in an environmentally friendly manner (see
Fire, disposal on page
422
Chapter 9 Replacing expendables
'Yes'
The consumable counter is reset.
'No' for example, if the transfer roller has not been replaced, but has in-
stead just been cleaned.
The consumable counter is not reset.
41).
Swivel on paper transport.
Advertisement
Table of Contents
