Table of Contents
Advertisement
Install cleaning belt
Install cleaning belt
Caution:
Observe the safety directives in the section
overview on page
Installing the cleaning belt
[223]
Proceed as follows:
1.
Remove new cleaning belt from the packaging.
[593]
Note
Holding pins, bearings and rollers are shaped so that there is only one way
to fit them.
The new upper roller with the unused cleaning belt is longer than the lower
roller.
[594]
2.
[595]
3.
416
Chapter 9 Replacing expendables
413.
Replacing the cleaning belt -
Place the new roller with the
unused cleaning belt on the
spring bearing top right, press
to the right and slide on the left
bearing with the holding pins.
Turn the new roller so that it en-
gages with the holding pins.
Insert the new empty roller in
the lower bearing.
Advertisement
Table of Contents
