Table of Contents
Advertisement
Importing a setup
Importing a setup
Introduction
You can apply setups that were created on another printing system Océ VarioStream
8000.
Importing a setup
[55]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
On the operator panel, select:
[96]
Note
When importing setups, existing links between job and color setups will be
taken into account.
3.
Click on the 'Import' button.
4.
Select the location from which the setup is to be imported:
[97]
Caution
Follow virus protection instructions
When importing from a USB memory stick, ensure that there are no viruses
on the USB memory stick.
110
Chapter 5 Working with the operator panel
For print job setups:
'VarioStream' -> 'Setup' -> 'Job setup'
For color setups:
'VarioStream' -> 'Setup' -> 'Color setup'
For channel-specific setups:
'VarioStream' ->'Setup' -> 'Setup channel A' / 'Setup channel B' / 'Setup
channel C'
USB memory stick
Transfer area (a directory on the drive of the controller hard disk (on
printer 1 for twin/triplex printing systems; serves the remote transfer of
setup data)
Advertisement
Table of Contents
