Table of Contents
Advertisement
Creating a new setup or changing a setup
Creating a new setup or changing a setup
Requirements
Requirements for saving setups:
The Key Operator or an operator authorized by the Key Operator must be logged
on.
There can be no error message.
To create a new setup or change a setup
[54]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
On the operator panel, select:
3.
Select the setup in the 'Setup list' tab.
4.
If this setup is not yet loaded, click the 'Load' button.
5.
Click on the 'Setup contents' tab and check the settings.
6.
Adjust settings as required in the menus under 'VarioStream' -> 'Configura-
tion'.
108
Chapter 5 Working with the operator panel
For generally valid print job setups:
'VarioStream' -> 'Job setup' menu
For color setups:
'VarioStream' -> 'Color setup' menu
For channel-specific setups:
'VarioStream' -> 'Setup channel A' / 'Setup channel B' / 'Setup channel C'
menu
Advertisement
Table of Contents
