Table of Contents
Advertisement
To remove the pressure roller
[194]
Proceed as follows:
[476]
Caution
The components in the fuser station could still be hot.
Do not touch any parts behind the safety covers identified with this icon:
[477]
Wear heat protection gloves!
[478]
1.
[479]
2.
3.
Carefully remove the pressure roller and place on a paper surface.
4.
Install pressure roller on page 356
Remove pressure roller
Grasp the pressure roller from
below and hold in the center.
Open the locking catches on the
right and left sides.
355
Advertisement
Table of Contents
