Table of Contents
Advertisement
Proceed as follows:
[496]
Caution
The nipple on the corotron wire may fall, unnoticed, into the developer sta-
tion when removing the charge corotron cartridge. If printing then contin-
ues, the developer station can be irreparably damaged.
When changing the faulty charge corotron cartridge, always check if the
nipple is still on the corotron wire. If the nipple is missing, search for and
find it.
3.
Check whether the nipple is still on the corotron wire. If the nipple is miss-
ing, search for it. To do this, pull out the developer station (see
developer station. on page
tire area around it. If no nipple is found, remove the photoconductor drum
(see
Removing the photoconductor drum on page
4.
Install charge corotrons on page 363
Remove torn charge corotron
273) and search the developer station and the en-
Clean the
400) and search this area.
365
Advertisement
Table of Contents
