Powering on the printing system
Note:
In the case of twin or triplex printing systems, steps 1 to 3 must be carried out on
each printer.
To power up the printing system
[62]
Proceed as follows:
[116]
1.
[117]
2.
3.
Log on as a user and request an access ticket.
4.
Activate the required channel on the operator panel. Click on the 'Channel
control' button.
The 'Channels' menu is displayed.
Click on the following button to activate the channel:
[118]
During the time needed for activation, the connecting icon is shown in yel-
low. An activated channel is represented by the following icon:
[119]
5.
Insert the paper web (see
page
127).
Powering on the printing system
Turn the main switch on the
right narrow side upwards to
Position I.
Press "On".
Preparing to insert the paper web - overview on
123