Table of Contents
Advertisement
Proceed as follows:
3.
Press the F1 button or click the
The context-sensitive Help appears for the selected message. It contains de-
tailed information on the cause of the error and how to correct it, e.g.:
[622]
4.
Eliminate the reason why printing stopped as indicated by the information
in the error message.
5.
Resume printing. The procedure depends on whether information was lost
or not when printing stopped:
Print stop without loss of information.
The printing system has stopped at the start of a page.
- Click on the 'Ready' button.
The printing operation is continued without any impairment to print or
fusing quality.
Print stop with loss of information.
To avoid damage, the printing system stopped immediately and there-
fore stopped in the middle of a page.
- Click on the 'Ready' button.
The print image on the damaged print pages is fused to ensure that the
tension roller and post-processing are not soiled.
Alternately, you can move the damaged pages from the printing system
by pressing the 'Eject' button.
- Restart print job.
Processing messages on the operator panel
button next to the error message.
433
Advertisement
Table of Contents
