Table of Contents
Advertisement
Replacing the toner feed - overview
Replacing the toner feed
Replacing the toner feed - overview
Caution:
Do not allow toner to get into eyes. In the event of contact with eyes, rinse
eyes out with plenty of cold water and seek medical help.
Avoid contact with the skin.. In the event of contact with the skin, wash
toner off with plenty of cold water.
Do not inhale toner. Avoid accumulation of dust. If, after inhaling toner,
you experience symptoms such as nausea, headaches or dizziness,
immediately go out into the fresh air.
Do not spill toner. You can slip on spilled toner. Clean up toner spill
immediately.
Always use an industrial vacuum cleaner with a grounded suction tube,
rubber nozzle and filter set for fine dust. For larger toner quantities, the
industrial vacuum cleaner must be explosion-proof.
Keep toner out of the reach of children and store it away from containers
used for food and drink.
Attention:
- Only use approved toner that is suitable for the developer being used (see
Order numbers and packaging units for consumables on page
Only use original, sealed toner bottles secured by an intact band.
Do not re-use toner.
Always store toner in a cool (< 35° C / 95° F), dry, and well-ventilated space.
Never expose toner to direct heat (sunlight, heaters, etc.)
Note:
The replacement procedure can only take place when printing is stopped.
Overview
You will find detailed information here on the following topics:
Removing toner feed on page 211
Installing toner feed on page 214
210
Chapter 6 Operating the printing system
297).
Advertisement
Table of Contents
