Table of Contents
Advertisement
Change toner bottle
Caution:
Do not allow toner to get into eyes. In the event of contact with eyes, rinse
eyes out with plenty of cold water and seek medical help.
Avoid contact with the skin. In the event of contact with the skin, wash
toner off with plenty of cold water.
Do not inhale toner. Avoid accumulation of dust. If, after inhaling toner,
you experience symptoms such as nausea, headaches or dizziness,
immediately go out into the fresh air.
Do not spill toner. You can slip on spilled toner. Clean up toner spill
immediately.
Always use an industrial vacuum cleaner with a grounded suction tube,
rubber nozzle and filter set for fine dust. For larger toner quantities, the
industrial vacuum cleaner must be explosion proof.
Keep toner out of the reach of children and store it away from containers
used for food and drink.
Attention:
- Only use approved toner that is suitable for the developer being used (see
Order numbers and packaging units for consumables on page 297
bottle identification with Océ TonerSafeTM on page
Only use original, sealed toner bottles secured by an intact band.
Do not re-use toner.
Always store toner in a cool (< 35°C / 95°F), dry, and well-ventilated space.
Never expose toner to direct heat (sunlight, heaters, etc.)
Note:
Toner bottle identification with Océ TonerSafeTM on page 302
bottle to be replaced during running printing operations without performing the
menu operations described below. After the low toner level warning is displayed, you
still have a few minutes to change the toner bottle before the printing system stops
due to lack of toner, depending on print speed and print image.
Replacement of the toner bottle is documented in the 'Consumables history' menu.
Change toner bottle
and
Toner
302).
allows the toner
327
Advertisement
Table of Contents
