Changing language/'User profile' tab
Changing language/'User profile' tab
Introduction
The operator panel language can be selected in the 'User profile' tab. The appearance
of the operator panel cannot be changed for the user groups "Operator" and "Key
Operator."
To change the language
[48]
Proceed as follows:
1.
Click on the 'General' -> 'User' -> 'User profile' menu.
2.
Click on the 'User profile' tab.
3.
Select the desired language from the 'Language' list.
4.
Click on the 'Apply' button.
102
Chapter 5 Working with the operator panel