Table of Contents
Advertisement
Affixing the paper web
Proceed as follows:
[245]
Caution
If the splice is moved too quickly, the paper web may be damaged or torn.
Only move the affixed paper web using the 'NPRO' button and observe the
paper transport. If you use the 'Eject' button to move the paper, you might
overlook damage to the paper web and not be able to prevent this damage in
time.
13.
Click the 'NPRO' button.
Move the affixed paper web through the printing system with the 'NPRO'
button until the splice has completely passed through the post print process-
ing unit.
Observe the paper web at the paper input, and correct the path of the paper
web as needed by running your hand sideways across the web.
14.
Click the 'Ready' button.
The printing systems will now re-synchronize and the print job will contin-
ue with the correct positioning.
208
Chapter 6 Operating the printing system
Advertisement
Table of Contents
