Table of Contents
Advertisement
Selecting settings and entering values
Selecting settings and entering values
Introduction
All parameters of the printing system can be set at the operator panel. The following
prerequisites have to be satisfied:
The necessary rights are available. These rights are assigned by the respective
"Key Operator" in the 'Edit user' menu.
The access ticket for this operator panel is requested.
The printing system is in the 'Stop' or 'Operator intervention necessary' status.
While the printing system is running, you can check the parameters but not reset
them.
You can select predefined settings and values through various operating elements,
such as selection lists, option fields, checkboxes, slide controls, etc.
You can also enter new values in the input fields using the keyboard.
Example: Entering the paper length
[50]
Proceed as follows:
[93]
1.
[94]
2.
3.
Applying or resetting settings on page 105
104
Chapter 5 Working with the operator panel
Select unit for paper length
The first click opens the list, the
second click selects the unit.
Select the number via the slide
control, or enter it into the input
field with the keyboard.
Advertisement
Table of Contents
