Table of Contents
Advertisement
Proceed as follows:
[175]
10.
11.
Tighten the knurled screw again.
[176]
12.
13.
Insert paper web in the next printing system (see
per web - overview on page
Paper guide for reverse-side printing
Push the lower ring on the ver-
tical deflection roller so that the
upper ring edge lies on the
marking for the paper width be-
ing used.
Guide the paper from the front
around the front slanted guide
rods upwards via the eject roll-
er.
127).
Preparing to insert the pa-
153
Advertisement
Table of Contents
