Replacing the developer station
Replacing the developer station — overview
Introduction
A replacement cart is required to replace a developer station.
Caution:
Heavy weight:
Note the heavy weight of the developer station (approx. 70 kg/145.35 lb) and
the correct functioning of the locks on the replacement cart.
Hot surfaces
After a longer period of printing, the motor of the developer station may be
hot. Do not touch the motor.
Attention:
Danger of damage
Bear in mind the width and height of the replacement cart when moving it.
Replacement cart
The replacement cart consists of the following parts:
Replacing the developer station — overview
217