Table of Contents
Advertisement
After inserting the paper web
After inserting the paper web
[71]
Proceed as follows:
1.
Close the left and right door at the front of the printing system.
2.
Close the cover hood.
3.
If a paper web with a different thickness or surface has been inserted, check
the position of the pressure rollers in the paper output (see
er on page
4.
If necessary, synchronize the paper path.
5.
If necessary, affix the paper web to the post-processing unit and/or insert the
paper web into the paper post-processing unit and make operational.
6.
Click the 'Ready' button on the operator panel.
Next step:
If you are using a single printing system, the paper web is inserted and the printing
system is ready to print.
If you are using a twin or triplex printing system, you have the following options:
Connect the printing systems with an inline turn bar (see
turn bar - overview on page
Connect the printing systems with a turning platform (see
turning platform - overview on page
184).
150)
After inserting the paper web
Paper guide in the inline
156)
Set pressure roll-
Paper guide in the
147
Advertisement
Table of Contents
