Table of Contents
Advertisement
Replacing the fine filter - overview
Replacing the fine filter
Replacing the fine filter - overview
Introduction
The printing system detects the end of the fine filter's service life automatically and
displays a timely warning on the operator panel.
Caution:
Do not allow toner to get into eyes. In the event of contact with eyes, rinse
eyes with plenty of cold water and seek medical help.
Avoid contact with the skin. In the event of contact with the skin, wash
toner off with plenty of cold water.
Do not inhale toner. Avoid accumulation of dust. If, after inhaling toner,
you experience symptoms such as nausea, headaches or dizziness,
immediately go out into the fresh air.
Do not spill toner. You can slip on spilled toner. Clean up toner spill
immediately.
Always use an industrial vacuum cleaner with a grounded suction tube,
rubber nozzle and filter set for fine dust. For larger toner quantities, the
industrial vacuum cleaner must be explosion-proof.
Keep toner out of the reach of children and store away from containers
used for food and drink.
Note:
Keep used fine filter for collection by Service or the contracted shipping company.
Overview
The following procedure is for replacing the fine filter:
Remove fine filter on page 381
Install fine filter on page 383
Cleaning the toner dust sensor on page 279
380
Chapter 9 Replacing expendables
Advertisement
Table of Contents
