Affixing the paper web
Attention:
Paper webs that are affixed offset or at an angle result in paper path problems.
Ensure that the rear paper web guide is always horizontal. Make sure that the
edges of the paper webs are flush.
Prevent soiling of post-processing.
Make sure that all the printed pages from the last print job are fused before the
end of the paper web.
To affix the paper web
[115]
Proceed as follows:
1.
Only for error message "EM001001 'Paper end detected'":
Reset the external error message at the roller feed.
2.
The printing system now continues to print until all back pages are printed.
It then stops briefly and moves approx. 6 further pages (12") forward, until
all pages are fused.
[239]
3.
Affixing the paper web
Open the pressure roller in both
printing systems:
Press the locking device and
swivel off the pressure roller.
205