Preparing the paper transporter
Proceed as follows:
[124]
4.
[125]
5.
130
Chapter 6 Operating the printing system
Swivel the loop puller roller up-
wards until it engages.
If the new paper is different
a
from the old paper (with or
without guide holes), the spike
wheel (S) must be positioned
S
accordingly in all printing sys-
tems:
H
a: New paper with guide
holes:
Move the lever (H) fully to
the right and release. The
spike wheel is now in the
b
upper position.
b: New paper without guide
holes:
Move the lever (H) from its
left position fully to the
right and release. The spike
wheel is now in the lower
position.