Table of Contents
Advertisement
Cleaning the paper edge sensor in the fuser station
To clean the paper edge sensor in the fuser station
[144]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
Lift up the cover hood.
[383]
3.
[384]
Caution
The preheating saddle can be very hot. You could burn yourself if you touch
it.
Do not touch the hot preheating saddle when cleaning the paper edge sensor.
[385]
4.
Cleaning the paper edge sensor in the fuser station
Open the cover above the pre-
heating saddle.
Clean the paper edge sensor at
the fuser station infeed with the
cleaning equipment supplied.
281
Advertisement
Table of Contents
