Table of Contents
Advertisement
Insert active filter
Proceed as follows:
[466]
4.
5.
Close the side door of fuser station.
6.
Enter on the operator panel whether a new active filter has been fitted:
7.
Click the 'OK' button on the operator panel to complete the procedure:
All aggregates of the printing system are inspected (duration around two to
three minutes) before the printing system is switched to the 'Ready' status.
350
Chapter 9 Replacing expendables
'Yes'
The message on the operator panel is deleted automatically, the replace-
ment of the active filter is recorded in the 'Consumables history' menu
and the consumable counter is reset.
'No'
The consumable counter is not reset.
Swivel on oiling unit and turn
the oiling unit turning knob to
the right to lock it.
Advertisement
Table of Contents
