Preparing to insert the paper web
Preparing to insert the paper web - overview
Attention: The following points must be noted:
When inserting a paper web, make sure that there is no paper between the
paper input and the paper output.
A continuous paper supply from the high stack or unroller must be guaranteed
during the entire insertion process.
Ensure that the operating mode setting corresponds to the print job (see
Configuring operation mode on page
Overview
Note:
To be able to insert the paper web, the printing system must be in the "Paper end"
status. As soon as the printing system recognizes it has run out of paper, it
automatically switches to paper insert mode.
If you want to select the paper web replacement time yourself, switch the printing
system into the stop status before inserting the paper web.
You will find information on the following topics:
Stopping the printing system and opening the doors on page 128
Preparing the paper transporter on page 129
Preparing the paper web on page 132
Preparing to insert the paper web - overview
106).
127