Table of Contents
Advertisement
Preparations for installing the developer station
Preparations for installing the developer station
Caution:
Heavy weight:
Note the heavy weight of the developer station (approx. 70 kg/145.35 lb) and
the correct functioning of the locks on the replacement cart.
Hot surfaces
After a longer period of printing, the motor of the developer station may be
hot. Do not touch the motor.
Attention:
Danger of damage
Bear in mind the width and height of the replacement cart when moving it.
To prepare to install the developer station
[122]
Proceed as follows:
[285]
1.
[286]
2.
228
Chapter 6 Operating the printing system
Remove the protective hood
above the developer station and
put in a safe place.
Check whether the developer
station is at the backmost posi-
tion on the replacement cart.
The locking bolt on the replace-
ment cart must be engaged in
the housing of the gear motor.
Advertisement
Table of Contents
