Table of Contents
Advertisement
Removing the waste toner bottle
Caution:
There can be a high build-up of static charge when vacuuming the toner
spill. Always use an industrial vacuum cleaner with a grounded suction
tube, rubber nozzle and filter set for fine dust. For large toner volumes (e. g.
1 bottle), an explosion-proof industrial vacuum cleaner must be used.
To remove the waste toner bottle
[175]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
On the operator panel, select the 'VarioStream' -> 'Changing consumables'
-> 'Replace waste toner bottle' menu.
3.
Click the 'OK' button to start the procedure.
Information on the icons displayed on the operator panel under
'Work-steps': See
4.
Open the left and center door at the back of the printing system.
[450]
5.
Explanation of icons on page
Removing the waste toner bottle
118.
Pull the locking lever of the
waste toner bottle holder for-
wards. The waste toner bottle
holder will go to its lower posi-
tion.
333
Advertisement
Table of Contents
