Table of Contents
Advertisement
Inserting the cleaning brush
Proceed as follows:
[587]
7.
8.
Close both doors at the front and the cover of the printing system.
9.
Indicate on the operator panel whether a new cleaning brush was installed:
In both cases, the message on the operator panel is automatically deleted,
and the replacement of the pressure roller is recorded in the 'Consumables
history' menu.
10.
Click the 'OK' button on the operator panel to complete the procedure:
All units of the printing system are inspected (duration around 2-3 minutes),
before the printing system is switched to the 'Ready' status.
412
Chapter 9 Replacing expendables
'Yes'
The consumable counter is reset.
'No'.
The consumable counter is not reset.
Swivel on the door to the photo-
conductor unit and close the le-
ver.
Advertisement
Table of Contents
